Magnetic Stirrer

The Silvonic Pro Colloidal Silver Generator makes up to a quart of CS without stirring. To make larger batches, use the Magnetic Stirrer.
The stirrer disc has 2 neodymium (rare earth) magnets and a stirrer bar or magnetite balls. The stirrer rod or balls go into the jar and magnetically couple with the rotating magnets.

$59.00

Free Priority Mail Insured S&H in US on orders over $49.
Shipping charges to other countries shown at checkout.

Category:

Description

Description

The Silvonic Pro Colloidal Silver Generator makes up to a quart of CS without stirring. It can take several hours to make 16 oz due to ultra-low current used to produce smallest (nano) particles and highest ratio of ions. The automatic shut-off feature means that you cannot ruin a batch! Just set it and forget it.

Making more than 1 quart/liter:

The Silvonic Pro uses the SWAP method of switching the polarity of the rods every 5 minutes, and this change in direction of electrical flow creates enough motion in the water to prevent agglomeration or clumping of the nano-particles. This advanced SWAP technique does not work in batches over a quart. If you want to make larger batches, we have a magnetic stirrer.

To speed up the process, heat the water up to 100°F/38°C and/or add some previously made CS to bring the initial meter reading up to about 004. We also offer a magnetic stirrer for making larger batches. For best results, make a pint (16 ounces/.5 L) at a time. Although CS keeps indefinitely, it probably works best when fresh.

Additional information

Additional information

Weight 1 lbs

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Specification

Includes universal 24V DC power supply for 110-240V AC electrical systems.

The stirrer will operate on 12-24V DC. Note: plug must have positive (+) center  or disc will rotate clockwise and unscrew!

We supply either a magnetic bar or magnetite balls depending on supplies.

The stirrer has a cord that plugs into the Silvonic Pro CS Generator so only one power supply will drive both units. Note: The stirrer does not shut off automatically even though the Silvonic Pro does.

Adjust speed so it makes one rotation in 2-3 seconds (30-40 RPM).

The Silvonic Pro Colloidal Silver Generator makes up to a quart of CS without stirring. It can take several hours to make 16 oz due to ultra-low current used to produce smallest (nano) particles and highest ratio of ions. The automatic shut-off feature means that you cannot ruin a batch! Just set it and forget it.

The stirrer disc has 2 neodymium (rare earth) magnets and a stirrer bar or magnetite balls. The stirrer rod or balls go into the jar and magnetically couple with the rotating magnets.

Making more than 1 quart/liter:
The Silvonic Pro uses the SWAP method of switching the polarity of the rods every 5 minutes, and this change in direction of electrical flow creates enough motion in the water to prevent agglomeration or clumping of the nano-particles. This advanced SWAP technique does not work in batches over a quart. If you want to make larger batches, we have a magnetic stirrer.

To speed up the process, heat the water up to 100F and/or add some previously made CS to bring the initial meter reading up to about 004. We also offer a magnetic stirrer for making larger batches. For best results, make a pint (16 ounces/.5 L) at a time. Although CS keeps indefinitely, it probably works best when fresh.

Thermal Stirring: Making 32 oz or less does not require stirring but it may improve the CS. Painting or applying dark tape to one side of the container and exposing to sun or a nearby light (eg, desk lamp) will stir the water by creating a temperature differential as warm water rises and cooler sinks.

Instructions

Brewing time: It may take several hours to make a batch. Adding a little CS from a previous batch will speed up the process. The purer and colder the water, the longer it takes. Batches larger than 24 oz will benefit from stirring to prevent clumping. For optimal quality, make pint (16 oz/.5L) or smaller batches. Faster CS Generators cannot make the Silvonic Pro’s clear, nano-particle CS with high ionic content.

Thermal Stirring: Making 32 oz or less does not require stirring but it may improve the CS. Painting or applying dark tape to one side of the container and exposing to sun or a nearby light (eg, desk lamp) will stir the water by creating a temperature differential as warm water rises and cooler sinks.

Videos