Colloidal Silver Generators
Make it fresh and save!

·$49.   MiniCS
·$109.   RSG-3
·$215. SilverPulser

• Countertop Distiller make your own high-quality distilled water for making CS and drinking. Now only $169. ($149 with a generator!)

• Colloidal Silver Ointment Kit $29.

• Terminator Zapper for   blood purification and parasites $119.

• More Info:
   "Natural Antibiotic"
   "A Closer Look"
   "Particle Size"    

The Silver Pulser: Colloidal Silver Generator with Zapper

"First Aid Kit of the Future"

The Silver Pulser ZBB5 Generates Ionic Colloidal Silver using 99.99% pure Silver.
It also zaps parasites and stimulates vital energy using the Dr. Robert Beck blood electrification protocol. Highly effective, portable, reliable and affordable!

Constant-Current and Constant-Voltage method for making the highest quality Ionic/Colloidal Silver.  Battery and/or AC power. (Scroll down to order)

For a basic CS generator for $99, click here.

See also the RSG-2 combination device for $179.

Click here for Silver Pulser FAQ (Frequently Asked Questions)

New Model ZBB5 features include:
New streamlined unit.
Quartz crystal Micro-Computer controlled functions for accurate timing sequences.
Built-in Constant-Current Circuit for the Ionic/Colloidal Silver Output.
Built-in 2 Hour Timer. Green lights show progress every 30 minutes.
Unit turns itself OFF after the 2 Hour Timer has completed. Set it and forget it!
Orange LED Light indicates when the current through the Silver Wires and is functioning correctly.
Special DIN style jack to comply with new government regulations
Soft carrying case

The Silver Pulser is an electronic unit which generates top quality Ionic-Colloidal Silver. This is achieved by using only the highest grade .9999 Pure Fine Silver Electrodes. Our Assay Certificate for Silver Wires is on file. Our Certificate of Compliance for Silver Wire Purity is on file.

Each Silver Pulser is a professionally designed quality unit, thoroughly tested and guaranteed to operate per specifications.

The Silver Pulser generates the finest quality Ionic-Colloidal Silver at a rate of 3-5 PPM (part per million) in 2 hours for 16 ounces of distilled water, with an Ionic-Colloid silver particle size that is mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope).

Unique Features:

A unique circuit design allows The Silver Pulser to operate from a single 9 Volt alkaline battery. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The Silver Maker.

Constant-Current Output: Output is 1.5mA +/- 0.5mA

Constant-Voltage Output: Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will remain at 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.

We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production. Our Certificate of Compliance for Silver Wire Purity is on file.

Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.

3 Year Parts and Labor Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and other probes are available.

The Unit:

The Silver Pulser is housed in a custom plastic enclosure, with a built-in compartment for the 9V battery. A slide-off lid allows you to change the battery easily. A series of Green LED lights indicates the elapsed time the unit is on. Minutes ON are shown at 30, 60, 90 and 120 minutes (2 hours). The Silver Maker will turn off silver production at the end of 2 hours (120 minutes). An Orange LED Light is used to indicate the Ionic-Colloidal Silver production is underway and an electrical circuit has been established. A Red LED Light indicates Low Battery.

The Silver Pulser has two jacks, one for plugging in the Fine Silver Wires and another for hooking up an AC-DC Wall Adaptor or other external power source, so you don't have to go through batteries. The Silver Wire cord is about 4 feet long and is very flexible.

The Silver Pulser is packaged in a soft carrying case for easy storage.

Electronics:

The Silver Pulser is designed to the highest standards. We have improved on the design with added features. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source, such as an AC-DC Wall Adaptor, which you can purchase from any electronics store.

Specifications:
Battery Voltage: 9 Volts DC (Alkaline Battery).
Optional Input Voltage: 6 - 12 Volts DC @ 500mA Wall Transformer/Adapter, Automobile Battery, or Solar Panel.
Output Voltage at Colloidal Silver Probes: 31 Volts DC, +/- 1 Volt Constant-Voltage Output
Output Current (Constant-Current): 1.5mA (+/- 0.5mA) Constant-Current Output
Ionic-Colloid Silver Production: 3 - 5 PPM (parts per million) for 120 minutes (2 hours) for 16 ounces distilled water.
Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
Ionic-Colloid Silver Colour: Clear or Pale Gold when using our constant-current method.
Silver Wire Life: Can make 50-75 gallons of 5-10 PPM ionic-colloidal silver per set of Silver Wires, when made as directed.

The Fine Silver Wires are 14 AWG (1.63 mm or 0.064" dia.) x 8" long (1.5 mm diameter x 20.3 cm long) and are constructed of only Pure Fine (.9999 or 99.99% pure) Silver Wire.

Weight of The Silver Pulser unit is only a few ounces - very lightweight.

Each Silver Pulser comes complete with:
One (1) control unit
Two (2) .9999 (4 Nine Grade) Pure Fine Silver Wire Electrodes
One (1) Silver Wire Holder
One (1) pair High Grade Plated Bio-Stimulator Probes
One (1) Velcro®/Neoprene® Straps
One (1) Velcro® Arm Strap
One (1) Scotchbrite® scrubber pad
One (1) 2 oz. Dark Glass Dropper Bottle
Six (6) Cotton Probe Sleeves
One (1) Soft carrying case
One (1) 9 volt battery
Operating Instructions
One (1) International AC-DC Wall Adaptor. (A $30 value).
3 Year Parts and Labor Warranty on internally mounted components

NOTE: The Bio-Stimulator/Zapper feature only functions with battery due to government regulatory stipulation. However, the Wall Adaptor can be used for Colloidal Silver production.

Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.
Output monitoring circuit and indicator.
All electrical wire connections made with Food Grade solders and fluxes for the highest in safety and purity.

International Voltage (220 or 240 Volt Mains) Requirements:
The Silver Pulser ships with an International Wall Adaptor intended for any voltage from 110VAC 60 Hz (North America) to 220/240 Volt AC 50 Hz Mains (as found in International Countries). Thus, you can use your new Silver Maker virtually anywhere in the world.

Additionally, the Silver Pulser may also be operated directly from an external 12 Volt DC Battery like an automobile cigarette lighter. You will need to purchase an Adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug. Radio Shack® usually has these Adapters.

Options for Powering the Silver Pulser

In the event of a power outage here are some options for powering the Silver Maker other than with its 9-Volt DC Alkaline Battery:
The Silver Pulser may be operated directly from a 12 Volt DC Battery like from an automobile cigarette lighter. You will need to purchase an Adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1 mm Plug, like from Radio Shack®.
The Silver Pulser can be powered by a suitable Solar Panel. Keep in mind that most solar panel generators are used to re-charge a battery which in turn operates the unit. Therefore we suggest you use a solar panel to re-charge a 12 Volt DC automobile battery (preferably a sealed Gel-Cel® type), then run the Silver Pulser directly from the battery. You will need to use a cord which has alligator clips on one end to attach to the battery terminals, and the appropriate Centre Positive, 2.1 mm Plug on the other end to plug into the Silver Pulser. Be careful with polarity! Centre-Positive! This type of cord with alligator clips on one end is probably not readily available, therefore you will to need to buy a cord and cut off the end that normally goes into the cigarette lighter, and solder your own set of alligator clips. Use a black and red alligator clips so you ensure polarity is correct each time you connect the circuit.
If you wish to operate the Silver Pulser directly from a solar panel you will need to use a 12 Volt DC rated output panel that is capable of supplying at least 1 Amp of current. The Silver Pulser's initial starting demands may require a higher output solar panel. That is why it is preferable to use a charged 12 Volt DC battery instead.

(Click here for QuikSilver 47 electrodes)

(Click here for CS300 electrodes)

ZBB5 Silver Pulser  $215. (reg $245 with AC Adapter) (includes Priority Mail shipping in US and Canada) Includes one pair .9999 silver electrodes, and AC adapter. 9 volt battery not included.

Extra pair 8" .9999 Silver Electrode Set $25. (Will make 50-75 gallons of 5 to 10 ppm CS)

Make exceptionally pure distilled water 1 gallon/4 hours
Purchase the Countertop Distiller + ZBB5 Silver Pulser for only $379. (Includes S&H in Cont. US) Save $50

European AC versions:
Purchase the Countertop Distiller (European version for 220-240v systems)+ ZBB5 Silver Pulser for only $399. (Plus $75 S&H) Save $30

Colloidal Silver Generators
Ointment | Testimonials | Articles | Pricing

Quick Silver, QuickSilver, quick silver, quicksilver

Products
Comfortaire™ Mattresses | Water Filtration Systems | E-Stim | Mental Fitness | Dr. Wolfe's Dentals

Home | About | Products | Order | Contact