Why pay $10 (or more) per ounce for Colloidal Silver when you can make it fresh and potent for 10 cents per ounce?

Make Your Own Colloidal Silver,
the Antibiotic of the Future!

Antibiotic-resistant germs are now considered epidemic in the United States, accounting for a growing number of serious infectious disorders. While most antibiotics disinfect about a half dozen or so germs, silver has been reported to disinfect hundreds. Most importantly, unlike conventional antibiotics, germs cannot build a resistance to the action of silver. A properly prepared colloid of silver is a special liquid preparation of this trace mineral that is extremely safe to use, even with children and pets, without many of the negative side effects of prescription antibiotics.
...from the pamphlet Colloidal Silver: The Natural Antibiotic Alternative by Zane Baranowski, CN.

Why our CS generators have led the field for over 10 years:
There are many manufacturers of Colloidal Silver Makers, Zappers, and Blood Electrifiers. Most of them have simply taken ideas or plans that were given away into the public domain and manufactured these devices without knowing how to check them for effectiveness! Our devices have been laboratory tested to ensure proper particle size. They were the first to make colloidal silver without using salt or other electrolytes which compromise quality and safety. Our units are the easiest to use and last for years!

Our colloidal silver generators produce true colloidal silver through electrolysis, the preferred method of manufacture. They electrically sinter microscopic particles of silver off the .9999 (99.99% pure) silver electrodes into distilled water. When you place the silver electrodes into water, you can see the colloidal changes taking place before your eyes. During the colloid making process, bubbles come off one electrode while the other darkens and emits a fine mist of microscopic silver particles.

The Silvonic Colloidal Silver Generator automatically produces solutions equal to or better than the finest available on the market! We have improved the design without increasing the cost to make premium, ultrafine 5-10 ppm solutions, with particle size in the range considered optimal (0.001 - 0.015 microns in diameter), and outperform any system on the market, guaranteed. It comes with two .9999 silver electrodes, and instructions that tell you everything you need to know to start making Colloidal Silver at home. All you need to add is distilled water, available at most markets for approx. $1/gallon or make your own with our tabletop distiller.

IMPORTANT NOTICE:
When considering the purchase of a Colloidal Silver Generator, make sure that the unit will produce transparent solutions in the 5-10PPM range!  Beware of units that require the use of electrolytes (salt etc.). They do not make Colloidal Silver with particle sizes as small as the Silvonic Colloidal Silver Generator and they can introduce unwanted chemical combinations. Many generators do not properly position the electrodes. Our generators use electrodes that plug into a holder for automatic, accurate spacing necessary for optimal particle size.

MORE INFORMATION ON COLLOIDAL SILVER USES AND PREPARATION:

CLICK HERE to read the Peter Lindemann article for a thorough understanding of many of the issues involved in making and using colloidal silver.

CLICK HERE for more detailed information on the generators, electrode and battery life, and how to make yellow Colloidal Silver, the very best available today.

CLICK HERE for testimonials from some happy users and a report on breastfeeding and mastitis.

CLICK HERE for information from the Baranowski pamphlet on particle size, effect on beneficial bacteria, and safety of colloidal silver.

CLICK HERE for our simple recommendations for Essential Supplements for Health.

CLICK HERE for an amusing note on "snake oil."

Colloidal Silver Generator Links
Ointment kit | Testimonials | Articles | Pricing

Products
Water Filtration Systems | E-Stim | Mental Fitness

Home | About | Products | Order | Contact

From http://en.wikipedia.org/wiki/Medical_uses_of_silver
Silver and silver compounds have an oligodynamic effect and are toxic for bacteria, algae and fungi in vitro. It is established that the antibacterial action of silver is dependent on the silver ion. The effectiveness of silver compounds as an antiseptic is based on the ability of the biologically active silver ion (Ag+) to irreversibly damage key enzyme systems in the cell membranes of pathogens.
It has long been known that the antibacterial action of silver is enhanced by the presence of an electric field. Applying a few volts of electricity across silver electrodes drastically enhances the rate that bacteria in solution are killed.
The reference dose, published by the United States Environmental Protection Agency in 1991, which recommends the estimated daily exposure which is unlikely to incur a appreciable risk of deleterious effects during a lifetime, is 5 µg/kg/d; meaning 5 microgram of silver per kilo of weight per person each day – about 1 quart of 10 ppm colloidal silver per month (about 1 ounce per day).

Safe Silver House!
The AK Steel Concept Home, a private residence, has been designed and built as a showcase for steel and antimicrobial silver-coated steel. It is a functional and artistic expression of the strength and flexibility of steel and allows manufacturers to realize the growing demand for antimicrobial products.
The AgION antimicrobial compound inhibits the growth of bacteria, molds, fungi and other microbes through the release of silver (Ag) ions. The controlled release of silver ions provides continuous antimicrobial protection for the product for the life of the coating. Click here for more on how the silver-coated steel acts on germs.

From COLLOIDAL SILVER: WHERE DOES IT GO WHEN YOU DRINK IT? HOW LONG DOES IT STAY THERE? © Copyright 1999 by Roger Altman
http://www.silvermedicine.org/AltmanStudy.pdf

*While it is certainly true that the study only addresses how one person's body handled colloidal silver elimination, the findings of the study support the logical conclusions made by many who have been involved with colloidal silver for years. Colloidal silver does NOT respond in the body in the same ways that silver compounds do.

The completion of this study marks the first real step toward conclusive evidence that the risk of colloidal silver toxicity is negligible to nonexistent. It can be stated with extreme confidence that a body, under normal conditions, does not retain colloidal silver in bodily tissues in any form, especially if the daily colloidal silver consumption is 2 mg or less ( more than twelve ounces of 5 ppm colloidal silver daily).

Furthermore, there is no data to suggest that doubling this daily intake would demonstrate different results in the body's ability to eliminate colloidal silver.

The Parts Per Million ( PPM ) issue is very confusing. Should one use a colloidal silver product with a high concentration or low one?

There are many technical considerations to address in making this determination. Generally speaking, a 3 - 5 ppm high quality colloidal silver product is a sufficient concentration for effectiveness in the body.

With extremely clean production methods, one can achieve a high quality colloidal silver at slightly greater concentrations, but any added benefit is questionable. For external use, greater concentrations may be desirable to increase the amount of actual silver exposed to the skin. We would not "offhand" recommend the use of silver products with high concentrations without fully disclosed laboratory analysis. Questions that need to be answered in such cases: 1) How much silver is actually in one standard dose? 2) What is the particle size range? 3) Are there any compounds or stabilizers in the product? 4) How are the particles dispersed in the solution? Most companies that market a high ppm colloidal silver will not answer all of these questions. Many, we have found, will not give you the time of day if you ask these questions, and request to see the results of both a TEM and studies conducted via atomic adsorption (AAS). We see incredible value in both methods of analysis. The silence of these companies when faced with sincere and well-placed questions speaks for itself."