Menu

Silvonic Turbo Automatic Nano-particle Colloidal Silver Generator

 |  | Comments Off on Silvonic Turbo Automatic Nano-particle Colloidal Silver Generator

Protect yourself with the purest, highest potency, bioavailable Nano-particle Ionic Colloidal Silver (CS).

Silvonic Turbo instructions

The Silvonic Turbo makes 1/2 gallon of 10 ppm CS in 3-4 hours. All the features and convenience of our best-selling Silvonic Pro but with longer rods and higher power.
The Silvonic Turbo CS Generator automatically makes clear 10 ppm CS for pennies per ounce using constant current. You can increase the strength with the push of a button. The CS made with our Silvonics retains its potency for years and will not degrade when exposed to light (the proof of nanoparticle size). 99.99% (“Four 9”) pure silver rods make around 200 gallons of fresh, pure, potent CS. We sell replacement sets, but any 10 or 12 gauge silver rod will work.
You can make other metal colloids with the Silvonic, but meters will not measure the strength. See our instructions on making Colloidal Copper in tabs below.
Made in USA. Lifetime Warranty on Control Unit.

$315.00

The Silvonic Turbo CS Generator comes with everything you need except a 1/2 gallon jar* and distilled water.
*At least 8″ tall.
We now include 1 CS Ointment Kit with every Turbo order.

Silvonic Turbo instructions

Purchase an extra pair of 14″ Silver Rods for $89, although the pair that comes with the Silvonic Turbo will make around 200 gallons of 10 ppm CS, so you probably don’t need another pair.

Out of stock

Free Priority Mail Insured S&H in US on orders over $49.
Shipping charges to other countries shown at checkout.

How to protect yourself and family from the Coronavirus and other threats.
Drink Colloidal Silver daily, spray it topically, and, best of all, breathe CS and protect your sinuses and lungs with one of our portable nebulizers, the Mini for $59, or the MistaSilver deluxe model on sale for $79.
Watch our Youtube video demonstrating the nebulizers.
At the first sign of infection, put some 3% Hydrogen Peroxide (H2O2) in ears while lying on side. Let it "sizzle" and do the other ear when it stops.
Take 10,000 IU D3 (with K2 preferably)
Drink ozonated water and breathe ozonated air.
Watch this 5 minute video: Heat your nose and sinuses with a blow dryer!
NOTE: No one can say whether or not a particular method will protect against the Novel Corona Virus with absolute certainty, but we know that Colloidal Silver kills almost every known pathogenic bacteria, virus, fungus, and mold on contact. Do not take our opinions as medical advice, but our products will cause no harm if used wisely, and they may prevent or lessen the effects of various biological agents.

Description

Colloidal silver acts as a powerful, natural antimicrobial that kills most bacteria, viruses, and fungi. Used regularly, it helps prevent infections and lessens their severity and duration. Research at Rice University shows that ions of silver (not uncharged particles) suffocate pathogenic organisms by disabling the enzyme needed to use oxygen. Fortunately, silver ions have no negative effects on the enzymes we need nor on any other aspect of human function.

Silvonic Turbo instructions

This page has some excellent info on Colloidal Silver

While you can buy Colloidal Silver in stores and on-line, why pay as much as $5 per ounce for solutions of unknown quality and potency when you can easily make your own fresh for pennies per ounce? You control the strength and know exactly what it has in it (distilled water and pure silver). And it requires no skill or monitoring to make it properly, automatically with the Silvonic Pro CS Generator. We have eliminated all the guess work and made it impossible to ruin a batch. The Silvonic Turbo will not work if you have “bad” water (with over 12 ppm*) and shuts itself off when it reaches the optimal strength. You can make it as strong as you like with the program button. Each push adds 2 Parts Per Million (ppm) to the normal shut-off point of 12 ppm. We include an accurate EC-3 Continuity Meter to test your distilled water. It also comes in handy if you’ve stored your CS and want to check its potency months or years later.
*By shifting the device into manual mode  (see instructions), it will put silver into any liquid but the resulting CS will not have optimal particle size.

The Silvonic Turbo makes the same high-quality Ionic Colloidal Silver as the Silvonic Pro but will make 64-ounce batches instead of 16 0unces. It has 14″ rods and more powerful circuitry. It has all the features and functions of the Silvonic Pro.

You will need a jar that has a depth of at least 7.5”. A half-gallon jar works best. You can make a gallon at a time but should apply a little heat* so the water moves enough to keep particle size optimal. *For best results, keep the water moving by applying a small amount of heat at the bottom or side of the jar. We have a heated base for this purpose.

The CS made by the Silvonic Turbo will have little to no color, will not degrade when exposed to light (the proof of nano-particle size), and will retain its strength for years when stored properly, ideally in glass at room temperature. With the included EC-3 meter, you can always check the strength of the CS.

Colloidal or Ionic? All Colloidal Silver consists of ions and particles in varying ratios. Research at Rice University shows that only silver ions kill micro-organisms (bacteria, viruses, fungi) and that the uncharged particles do not. While some sources argue that silver ions become inactivated when they come into contact with stomach acids and salts in the body, no clinical research demonstrates that this happens. We know from extensive use in the field that Ionic/Colloidal Silver works when used in a timely fashion and in sufficient quantity. As we also know that properly made CS has no negative effects, it makes sense that, when needed, one should use CS liberally and often. Consider this, if CS had any side effects, eg turning users blue, with hundreds of thousands of regular users of CS, wouldn’t we have seen many Smurfs by now? Research even indicates that CS increases the effectiveness of antibiotics!

The Silvonic Turbo produces a colloidal solution with around 85% silver ions, single atoms minus an electron, less than 0.0003 microns in diameter (1 micron = 0.001 millimeters). Faster CS generators cannot make consistent nanoparticles. Join the Slow Silver Movement! It takes longer to make it right. Don’t hurry and don’t worry.

The Silvonic Turbo works best in 64 ounce (1/2 gallon) batches but can make up to a gallon of CS. Large batches will benefit from a small amount of heat to keep the water moving. It can take 4-5 hours to make 64 oz of 10 ppm CS due to ultra-low current used to produce ultra-small nano-size particles with the highest ratio of positively charged ions to particles. Gallon batches will take much longer. The automatic shut-off feature means that you cannot ruin a batch! Just set it and forget it.

Makes up to 1 gallon/4 liters.
The Silvonic Turbo uses the SWAP method of switching the polarity of the rods every 5 minutes and this change in direction of electrical flow creates enough motion in the water to prevent agglomeration or clumping of the nanoparticles. This advanced SWAP technique does not work in batches over a gallon. For the very best results when making a gallon or more at a time, place a heat source, eg a desk lamp, next to the jar.

To speed up the process, heat the water (no hotter than 100° F)  and/or add some previously made CS to bring the initial meter reading up to about 004.  For best results, make a half-gallon (64 ounces/2 L) at a time. Although CS keeps indefinitely, it probably works best when fresh.

Our rods have a U shape for 2 important reasons: 1. You can get twice as much silver into a small container than with straight rods. 2. Sharp edges and ends in the water produce large particles. You will need a jar that has a depth of at least 7.5”. A half-gallon jar works best.

Each pair of 14″ rods will make around 200 gallons. We sell replacement sets for $75 here, but any 10 or 12 gauge silver rod will work.

You can make other metal colloids like copper and gold with the Silvonic, but meters will not measure the strength.

The Silvonic Turbo Colloidal Silver Generator makes the highest quality Nanoparticle Ionic Colloidal Silver using 99.99% pure silver electrodes. It has variable strength PPM (Parts Per Million) settings and shuts itself off automatically when it reaches the desired strength. Using the SWAP method that alternates the current (AC), the electrodes will have very little build-up, wear evenly, and the water needs no stirring for batches 1 gallon and under.

You will get consistently excellent Colloidal Silver every time because the Silvonic Turbo monitors the amount of silver in the water. You can check your water for purity too with the included digital tester. It runs on just about any power!

This CS generator uses the most advanced circuitry available to the home brewer. The SWAP AC method produces the smallest size (.001 micron range) silver particles and the most ions. It also detects the concentration of silver in solution and automatically stops at the target PPM. While you do not need a meter to make excellent CS, we provide one with our Silvonic Pro Turbo kit. Use it to check your distilled water as well as the final result. NOTE: Most distilled water in stores works well with the Silvonic Turbo, but you should always test it before making CS. If it has more than about 3 PPM, it will not make the best CS. If you can’t find acceptable distilled water, consider getting one of our countertop distillers. We also recommend transferring the distilled water from the plastic container into a glass container if storing it. Distilled water leaches plastic over time except for some high-quality plastics.

We recommend 5-15 PPM CS for best results. Nano-particle CS works better than stronger solutions which typically have larger particles. Instead of making stronger CS, just take more 5-15PPM. Topical uses like CS ointment can use 15-25 PPM CS. High PPM CS (over 20 ppm) usually known as “Mild Silver Protein” has overly large particle sizes and typically uses an egg protein (casein) to keep them in suspension.

Why you should have a meter:
In order to make CS with the smallest particles, the water should have no minerals or other contaminants. While the Silvonic Turbo lets you know if your water has an unacceptable level of minerals by shutting off quickly, the EC-3 conductivity meter shows the quality of your water*. You should also check your CS strength with a meter so that it does not exceed 15 PPM for internal use. We recommend 5-15 PPM for the best particle size and ionic content.
*Note: The meter shows the presence of conductive ions. It can read 0 and the water can still have non-conductive particles that may show up as black gunk. If this happens, try another batch of distilled water. Also, make sure that the glass container used to make the CS has no built-up deposits. Occasionally scrub the jar well and rinse with distilled water. Do not store distilled water or CS in plastic unless of high-quality like PETE, etc.

With the two included 14″, 12 gauge, U-shaped, 99.99% pure silver rods, the Silvonic Turbo can produce around 200 gallons of 10 ppm CS. We sell replacement rod sets, but you really don’t need them because you probably will never need to make 200 gallons!

Colloidal Silver Tips

  • Store distilled in glass to prevent plastic leaching
  • Rinse containers with distilled water… not soap etc
  • Good CS is clear and will not discolor in light. Good to store CS in brown bottles but not absolutely necessary with the Silvonic Turbo.
  • Store at room temp.
  • Around 10 µS/ppm works best internally.
  • Diluting stronger yellow CS does not work as well as clear 10 ppm.
  • Use CS daily (about 1 oz) to kill mouth bacteria (for teeth, gums, heart) and bolster the immune system. When challenged use a lot (several ounces every hour for as long as needed).
  • Hold in mouth for several minutes to absorb.
  • Use a Nebulizer to get CS directly into the lungs. It protects the lungs and gets into the bloodstream quickly. Relieves allergy symptoms immediately.
  • Irrigate sinuses with CS at the first hint of a cold or allergies.
  • Spray on cuts, in eyes, on the scalp. Soak feet. Use as a deodorant.
  • Add CS to your pet’s water.
  • Disinfect counters, food, water. Spray on meat to kill MRSA, see http://beforeitsnews.com/health/2014/12/shocking-deadly-mrsa-flesh-eating-bacteria-now-contaminates-50-of-u-s-food-supply-2558594.html
  • The purer the water (000 µS), the better the CS.
  • CS turbocharges antibiotics. While we avoid using antibiotics, if you must take them on doctor’s orders, use CS too and they’ll work better. Take probiotics too, especially once you’ve finished the course of antibiotics.

Additional information

Weight 1 lbs
Combo Discounts

Silvonic Turbo CS Generator $295, Silvonic Turbo CS Generator + Ointment Kit $315

Comments are closed.